Skip to product information
1 of 5

Deco Coat

3D Epoxy System - Medium Viscosity

3D Epoxy System - Medium Viscosity

Regular price Rs. 499.00
Regular price Rs. 600.00 Sale price Rs. 499.00
Tax included. Shipping calculated at checkout.

Mix ratio: 2:1 by weight .

Eg: 100g Resin and 50g Hardener

Some of the Articles you can make with this -

1. Coasters
2. All mould work ( Except Deep Casting )
3. Top coat
4. Jewellery
5. Clocks

Technical Details:

Detail Time Temperature

Pot Life :                         55-60 mins@ 25 deg C

Overcoat time :              4-5 hours@ 25 deg C

Touch dry :                     5 hours@ 25 deg C

Cure to handle :             7-8 hours@ 25 deg C

Full internal cure :          14 hours@ 25 deg C


Epoxy Resin : 800 gm
Epoxy Hardener : 400 gm


• 100 % Moisture Free Guaranteed
• 100 % Shrinkage Free
• Low odor
• Low VOC, Zero Solvents, Zero Fumes
• Medium Viscosity
• Pot life of 55-60 minutes
• Cure to the touch in 5hours (@25 Deg C)
• Perfect for Top Coats
• Maintain and less wastage of material due to its viscosity
• Recommended for clear and pigmented coatings
• Ready to re-coat or hang in 6 hours


1. Measure
With gloves on , pour the resin and harder into the mixing container, in the ratio 2:1.
2. Mix
Stir well for at least 3 minutes. Try not to incorporate air in to the system while mixing. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you mix the resin and hardener, you'll have about 45 minutes of working time before the resin thickens and starts to cure.
3. Pour
After making sure your piece is level, go ahead and pour Decocoat Epoxy Resin over your work. Since it is self-leve-ling it will start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface.
Most of the bubbles will pop on their own, as our resin is specially formulated to do so. You may use a hot air gun over unpopped bubbles if required.
4. Wait
Decocoat Epoxy Resin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary.
In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.
5. Clean Up
To reuse your mixing tools, wipe them down with a paper towel before the resin dries.

Shipping & Returns


Our refund policy is 15 Days. Unfortunately we can’t offer you a refund or exchange after this period. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. 

To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer.

Refunds (if applicable)

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. 

Exchanges (if applicable)

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at and send your item to: 105, Plot no. C/9, Globe Estate Ph-1, MIDC, Dombivli, Maharashtra 421203, Dombivali, Maharashtra 421203.


Our products are shipped within 4-7 Days. To return your product, you should mail your product to: 105, Plot no. C/9, Globe Estate Ph-1, MIDC, Dombivali, Maharashtra 421203. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund. Depending on where you live, the time it may take for your exchanged product to reach you, may vary. You should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

View full details

Customer Reviews

Based on 7 reviews
Great finishing

Glossy finish & humidity proof works really well for top coat

Suvagiya Krupa


Richa Chawla

It's a great resin for art work.... even in humidity as well, curing is doing in a very nice way.... recommended by my trainer and once I used it, m in love working with it.

Zia Nasim

3D Epoxy System - Medium Viscosity

Sujay Anerao

3D Epoxy System - Medium Viscosity